Java Programming Notes # 2020
Preface
This series of lessons is designed to teach you how to use the
Java Sound API. The first lesson in the series was entitled
Java Sound, An
Introduction. The
previous lesson was entitled
Java Sound,
Using Audio Line Events.
Two types of audio data
Two different
types of audio data are supported by the Java Sound API:
- Sampled audio data
- Musical Instrument Digital Interface (MIDI) data
The two types of audio data are very different. I
am concentrating on sampled audio data at this point in time. I will defer
my discussion of
MIDI until later.
Viewing tip
You may find it useful to open another copy of this lesson in a separate
browser window. That will make it easier for you to scroll back and
forth among the different listings and figures while you are reading about
them.
Supplementary material
I recommend that you also study the other lessons in my extensive collection
of online Java tutorials. You will find those lessons published at
Gamelan.com.
However, as of the date of this writing, Gamelan doesn’t maintain a consolidated
index of my Java tutorial lessons, and sometimes they are difficult to
locate there. You will find a consolidated index at
www.DickBaldwin.com.
Material in earlier lessons
Earlier lessons in the series
showed you how to:
- Play back audio files, including those that you create using a Java
program, and those that you acquire from other sources. - Capture microphone data into audio files types of your own choosing.
- Capture microphone data into a ByteArrayOutputStream object.
- Use the Sound API to play back previously captured audio data.
- Identify the mixers available on your system.
- Specify a
particular mixer for use in the acquisition of audio data from a microphone. - Understand the use of lines and mixers in the Java Sound API.
Preview
Previous programs were simple and not very robust
In the interest of simplicity, the sample programs that I have provided in
earlier lessons have not been particularly robust. For example, in the
previous programs, if the program attempts to capture data using an audio format
that is not supported by the system, the program simply throws an error and
aborts. Similarly, if the program attempts to write an audio file as a
file type that is not supported by the system, the program throws an error and aborts.
Your programs need to be more robust
Obviously, programs that you write for the real world must be more robust than
those that I have provided. Fortunately, the AudioSystem class
provides methods, such as getAudioFileTypes, isFileTypeSupported,
and isConversionSupported, which can be used to write more robust
programs. Methods such as this can be used to limit the choices presented
to the user, or to test the choices made by the user before trying to execute
code that implements those choices.
Limiting the
choice of output file types
In this lesson, I will teach you how to
use the getAudioFileTypes method of the AudioSystem class to limit
the file-type choices presented to the user, thus eliminating the possibility
that the user will select an output file type that is not supported by the
system.
Hopefully, this example will suggest other ways in which you can use methods of the
AudioSystem class to make your audio programs more robust.
Discussion
and Sample Code
The user interface
The user interface for the sample program that I will discuss in this lesson is shown in Figure 1.
Figure 1 GUI for current version of the program
More robust update of an earlier program
This is an update of the program named AudioRecorder02, which was
discussed in a previous lesson entitled
Java Sound, Capturing Microphone Data
into an Audio File.
This updated version is more
robust than the original version. In particular, this updated version demonstrates how to limit the file-type choices to
only those that are supported by the system. This eliminates the
possibility that the user might select an audio file type that is not supported
by the system.
Compare GUI with earlier program
The GUI for the earlier program named AudioRecorder02 is shown in Figure
2. In both Figure 1 and Figure 2, the user selects a file type by
selecting a radio button from among those exposed by the GUI.
Figure 2 GUI from earlier version of the program
If you compare Figure 2 with Figure 1, you will see that the GUI shown in Figure
1 limits the user to the three file types supported by my system, whereas the
GUI in Figure 2 allows the user to select file types that are not supported by
my system. Selecting file types that are not supported by the system
results in runtime errors which, if not handled properly, will cause the program
to abort.
(Because your system may support a different set of file types, your GUI may
not look exactly like Figure 1. In particular, your GUI may display a
different set of radio buttons.)
Basic operation
This program demonstrates the capture of audio data from a microphone into an audio file
type of the user’s choosing.
When the program starts, a GUI appears on the screen containing the following buttons,
as shown in Figure 1:
- Capture
- Stop
In addition, up to five radio buttons appear in the GUI, allowing the user to select
from among the following five audio file types:
- AIFC
- AIFF
- AU
- SND
- WAVE
(These are the common file types supported by Java SDK version 1.4.1. A
future version of the SDK might support additional file types that are not included
in the above list. If so, this program will default to writing
file type AU in place of the new file types that are not included in the above list.)
User’s choice is limited
Only those file types that are supported by the system are presented to the user
in the GUI (see Figure 1). Therefore, only those file types supported by the
system can be selected by the user.
Capturing data from the microphone
When the user clicks the Capture button, input data from a microphone is captured and saved in an audio file named junk.xx having the specified file format.
(xx is the common file name extension for the specified file type. You can easily
modify the program to change the file name to something other than junk if you choose to do so.)
Data capture stops and the output file is closed when the user clicks the Stop button.
Playing back the audio data
It should be possible for you to play back the audio file using any of a variety of readily available media players, such as the Windows Media Player.
Using a Java audio player
I showed you how to write a Java program to play back audio files in the
lesson entitled
Java Sound, Playing Back Audio Files using Java. You can also use that program to play back the audio file produced by
this program.
Will discuss the program in fragments
As usual, I will discuss this program in fragments. A complete listing of
the program is shown in Listing 14 near the end of the lesson.
Updated version of a previously-discussed program
The program that I will discuss in this lesson is an updated version of the
program named AudioRecorder02, which I discussed in detail in the lesson entitled
Java Sound, Capturing Microphone Data into an Audio File.
Although I will discuss the entire program briefly to establish the
context, I will concentrate my detailed discussion on those aspects of the
new program that were updated to make the program more robust. I recommend
that you refer back to the lesson listed above for a detailed discussion of the
other parts of the program.
The program named AudioRecorder03
The new program, named AudioRecorder03, demonstrates the use of a Java program
to capture audio data from a microphone into an audio file type of the user’s
choosing, where the choices presented to the user are limited to only those file
types supported by the system. Thus, the user is prevented from choosing
file types that are not supported by the system, which would result in
runtime errors if selected.
The controlling class named AudioRecorder03
The class definition for the controlling class begins in Listing 1.
public class AudioRecorder03 extends JFrame{
AudioFormat audioFormat;
TargetDataLine targetDataLine;
final JButton captureBtn =
new JButton("Capture");
final JButton stopBtn = new JButton("Stop");
final JPanel btnPanel = new JPanel();
final ButtonGroup btnGroup = new ButtonGroup();
Listing 1
|
The class definition begins by declaring (and initializing) several
instance variables. The instance variables in Listing 1 were discussed in
the earlier lesson, so I won’t discuss them further here.
New instance variables
The code in Listing 2 declares two new instance variables that were not
included in the program in the earlier lesson.
JRadioButton[] radioBtnArray; AudioFileFormat.Type[] fileTypes; Listing 2 |
An array of JRadioButton objects
The program in the earlier lesson displayed five radio buttons on the user
interface, regardless of the number of audio file types supported by the system.
Since the number of radio buttons was known at compile time, a different instance variable
was declared to contain a reference to each of the five radio buttons.
Number of radio buttons is unknown at compile time
In this version of the program, one radio button is required for each file type
supported by the system. Therefore, the number of required radio buttons
is not known at compile time. The number of file types supported by the
system cannot be determined until runtime.
Since the required number of radio buttons cannot be
determined until runtime, it is necessary to accommodate the
uncertainty in the program code.
A reference variable for an array object
The code in Listing 2 declares a reference variable capable of holding a
reference to an array object of type JRadioButton. The actual size
of the array is established at runtime when it is determined how many radio
buttons are to be displayed.
An array object is instantiated at runtime, and that object’s reference is
stored in the reference variable named radioBtnArray in Listing 2.
Then the references to the individual radio buttons are stored in the elements
of the array object. We will see the code that accomplishes this later.
An array of tile types
The second instance variable declared in Listing 2, named fileTypes, is a
reference variable capable of holding a reference to an array object. The
array object is capable of holding references to objects of type
AudioFileFormat.Type.
An array object will be instantiated at runtime with the size of the array equal
to the number of file types supported by the system. The array object’s
reference will be assigned to the reference variable named fileTypes.
A reference to one of the supported file types will be stored in each element of
the array.
The main method
The main method shown in Listing 3 is identical to that used in the
program in the earlier lesson, so I won’t discuss it further.
public static void main( String args[]){
new AudioRecorder03();
}//end main
Listing 3
|
The constructor
The constructor begins in Listing 4. That portion of the constructor shown
in Listing 4 is the same as was used in the program in the earlier lesson.
If you don’t understand something in Listing 4, you should refer back to the
earlier lesson for a detailed discussion.
public AudioRecorder03(){//constructor
captureBtn.setEnabled(true);
stopBtn.setEnabled(false);
//Register anonymous listeners
captureBtn.addActionListener(
new ActionListener(){
public void actionPerformed(
ActionEvent e){
captureBtn.setEnabled(false);
stopBtn.setEnabled(true);
//Capture input data from the
// microphone until the Stop button is
// clicked.
captureAudio();
}//end actionPerformed
}//end ActionListener
);//end addActionListener()
stopBtn.addActionListener(
new ActionListener(){
public void actionPerformed(
ActionEvent e){
captureBtn.setEnabled(true);
stopBtn.setEnabled(false);
//Terminate the capturing of input data
// from the microphone.
targetDataLine.stop();
targetDataLine.close();
}//end actionPerformed
}//end ActionListener
);//end addActionListener()
//Put the buttons in the JFrame
getContentPane().add(captureBtn);
getContentPane().add(stopBtn);
Listing 4
|
Get the supported file types
Continuing with the discussion of the constructor, the code in Listings 5
through 8 is new to this version of the
program.
fileTypes = AudioSystem.getAudioFileTypes();
Listing 5
|
The code in Listing 5 invokes the static getAudioFileTypes method of the
AudioSystem class to get and save the file types for which file writing
support is provided by the system.
Returns an array of type AudioFileFormat.Type
This method returns a reference to an array object of type
AudioFileFormat.Type. The reference is assigned to the instance
variable named fileTypes, which was declared in Listing 2.
According to the documentation, "If no file types are supported, an array of
length 0 is returned."
(That is a
possibility that I didn’t explicitly take into account in this version of the
program, and affords another opportunity to make the program more robust.)
Once the statement in Listing 5 has finished execution, the program has
identified the number and the types of files that can be written by the system.
That information is contained in the array object referred to by the reference
variable named fileTypes. We will make use of this information at
several points later in the program.
Create and array of JRadioButton objects
Now we know (or can easily determine) how many radio buttons we need. We need one radio button for
each element in the array of supported file types.
radioBtnArray = new JRadioButton[
fileTypes.length];
for(int cnt = 0; cnt < fileTypes.length;
cnt++){
String strType = fileTypes[cnt].toString();
if(cnt == 0){
radioBtnArray[cnt] = new JRadioButton(
strType,true);
}else{
radioBtnArray[cnt] = new JRadioButton(
strType);
}//end else
radioBtnArray[cnt].setActionCommand(
strType);
}//end for loop
Listing 6
|
The code in Listing 6:
- Instantiates a new array object of type
JRadioButton. - Assigns the object’s reference to the instance variable named
radioBtnArray (see Listing 2). - Populates each element in the array with a reference to a
new JRadioButton object.
Populate the array
A for loop is used in Listing 6 to populate each of the elements in the
array with a reference to a new JRadioButton object. There are some
special requirements that apply to the radio buttons:
- It must be possible for the user to identify the file type associated
with each radio button. - It must be possible for the program to identify the file type
associated with a radio button that has been selected by the user.
I accomplished both of these requirements using a String representation of the
file type associated with each button.
During each iteration of the for
loop in Listing 6, a String representation of the file type stored in the
corresponding element of the array of file types was created by invoking the
toString method on the file-type element.
User identification of the radio buttons
The string returned by the toString method was passed to the constructor
for the corresponding JRadioButton object. This produced a label
next to the radio button, which provides the visual
relationship between the button and the file type.
(Note also that the constructor used for the first radio button that was
instantiated requires an incoming boolean parameter in addition to the
String parameter. This causes the first radio button to be in the
"selected" state when the group of radio buttons first appears on the screen.
See Figure 1.)
Program identification of a selected button
The String returned by the toString method was also passed to the
setActionCommand method of the new JRadioButton object in Listing 6.
If you are familiar with JavaBeans component properties, you will recognize that
this sets the value of the actionCommand property of the radio button to
the specified String value. This value can later be retrieved by
invoking the getActionCommand method on a reference to the model that
represents a selected radio button (more on this later).
Assuming that the String value returned by the toString method is
unique, this provides a methodology for uniquely identifying the button that was
selected by the user. This is probably a safe assumption, since the
String value that is returned is intended to uniquely identify a specific
audio file type.
Include the radio buttons in a group
As explained in the earlier lesson, the radio buttons are caused to participate
in a mutually-exclusive group by adding them to a ButtonGroup object.
This is accomplished in Listing 7, which uses a for loop to add each
radio button to the group.
for(int cnt = 0; cnt < fileTypes.length;
cnt++){
btnGroup.add(radioBtnArray[cnt]);
}//end for loop
Listing 7
|
Add the radio buttons to the JPanel object
Also, as explained in the earlier lesson, simply adding the radio buttons to a
ButtonGroup object doesn’t accomplish a physical grouping of the radio
buttons on the screen. This is accomplished in Listing 8 by adding the
radio buttons to a JPanel object.
for(int cnt = 0; cnt < fileTypes.length;
cnt++){
btnPanel.add(radioBtnArray[cnt]);
}//end for loop
Listing 8
|
Finish the GUI and the constructor
The code in Listings 5 through 8 was different from the code in the similar
program discussed in the earlier lesson, due to upgrading the program to make it
more robust.
The code in Listing 9 is very similar to the code that was discussed in the
earlier lesson, and won’t be discussed further in this lesson.
//Put the JPanel in the JFrame
getContentPane().add(btnPanel);
//Finish the GUI and make it visible
getContentPane().setLayout(new FlowLayout());
setTitle("Copyright 2003, R.G.Baldwin");
setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(300,120);
setVisible(true);
}//end constructor
Listing 9
|
The captureAudio method
The method named captureAudio is invoked by the event handler on the
Capture button (see the boldface statement in Listing 4). This method captures audio data from a microphone and
causes that data to be saved in an audio file. The version of the
captureAudio method used in this lesson is very similar to the version used
in the corresponding program in the earlier lesson. Therefore, I will
discuss this method only briefly in this lesson.
An abbreviated version of the captureAudio method is shown in Listing 10.
(Note that much of
the code has been deleted from Listing 10 for brevity. The entire method
can be viewed in Listing 14 near the end of the lesson.)
private void captureAudio(){
try{
//Code deleted for brevity.
new CaptureThread().start();
//Code deleted for brevity
}//end catch
}//end captureAudio method
Listing 10
|
Spawn a thread to do the actual work
The code in Listing 10 spawns a new Thread object and starts it running.
The run method of the Thread object actually does the work to
capture audio data from a microphone and
to write that data into an audio file. The thread’s run method will
continue running and capturing audio data until the Stop button is
clicked by the user (see Figure 1).
Spawning a thread is very important
When writing event-driven programs in Java, if an event handler is going to
require any significant amount of time to complete, that handler should spawn a
thread to do the work of responding to the event, and then return as quickly as
possible. This makes it possible for the system to respond to other events
that may occur on the event-handling thread.
The captureAudio method returns control to the event handler on the
Capture button immediately after starting the thread. The event
handler on the Capture button terminates and returns very quickly thereafter, making
it possible for the event-handling thread to respond when the Stop button
is clicked by the user.
The CaptureThread class
The Thread object used to actually capture the audio data from the
microphone and store it in an audio file is instantiated from the class named
CaptureThread. The definition of the CaptureThread class and
its run method begins in Listing 11. Portions of this class are
significantly different from the similar but less-robust version discussed in
the earlier lesson. I will discuss those portions that are different in
detail.
class CaptureThread extends Thread{
public void run(){
AudioFileFormat.Type fileType = null;
File audioFile = null;
Listing 11
|
The run method
The run method in this version begins just like the earlier version, by
declaring two local variables and initializing their values to null.
The first local variable, named fileType, will be used later to hold a
reference to the selected file type as AudioFileFormat.Type.
The second local variable, named audioFile, will be used later to hold
a reference to a File object that represents the physical audio file.
Get the selected file type
The code in Listing 12 is significantly different from the code in the similar
program in the earlier lesson.
In operation, the user selects a radio button (see Figure 1) from a group
of radio buttons to specify the type of the audio file. The code in
Listing 12 gets the selected file type identified as a String.
String strType = btnGroup.getSelection().
getActionCommand();
Listing 12
|
The getSelection method
Recall that all of the radio buttons belong to a ButtonGroup object.
That object’s reference is held in a reference variable named btnGroup.
The code in Listing 12 begins by invoking the getSelection method on the
reference to the ButtonGroup object. According to Sun, this method
"Returns the model of the selected button" as type ButtonModel.
What is a ButtonModel?
Swing components, such as JRadioButton, are created using a modified
model-view-control paradigm. Briefly, the code behind each component
consists of a model and a view (which contains a built-in control).
(If you want to know more about the general model-view-control paradigm, see
the lessons on that topic on my web site.)
The model contains the information that describes the component, while the view
is responsible for rendering the component according to the information stored
in the model.
What does Sun have to say?
Here is part of what Sun has to say about the ButtonModel class.
"State Model for buttons. This model is used for check boxes and radio
buttons, which are special kinds of buttons, as well as for normal buttons. For
check boxes and radio buttons, pressing the mouse selects the button… In use,
a UI will invoke setSelected(boolean) when a mouse click occurs
over a check box or radio button. …"
Hopefully, Sun’s description, when combined with my earlier explanation, will
help you to understand the concept of a model.
The getActionCommand method
My objective is to first identify the selected radio button, and then to
identify the audio file type associated with that button. The
getSelection method discussed above returns a reference to the model that
represents the selected radio button.
Once I have identified the model belonging to the selected radio button, I can
invoke the getActionCommand method on that model to get the value of the
actionCommand property.
In Listing 6 discussed earlier, I set the actionCommand property
belonging to each radio button to a value that identifies the file type
represented by that button. The code in Listing 12 retrieves that value
and saves it in the String variable named strType.
Set the file type and extension
Next, I need to set the file type and file extension based on the selected
radio button. The code in Listing 13 tests the specified file type
against the five common audio file types supported by the Java SDK version 1.4.1.
If a match is found, the file type and extension is set accordingly. If a
match is not found, the file type and extension is set to the default file type
AU.
if(strType.equals("AIFC")){
fileType = AudioFileFormat.Type.AIFC;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("AIFF")){
fileType = AudioFileFormat.Type.AIFF;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("AU")){
fileType = AudioFileFormat.Type.AU;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("SND")){
fileType = AudioFileFormat.Type.SND;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("WAVE")){
fileType = AudioFileFormat.Type.WAVE;
audioFile = new File("junk." +
fileType.getExtension());
}else{
System.out.println(
"File type not recognized by program.");
System.out.println(
"Creating default type AU");
fileType = AudioFileFormat.Type.AU;
audioFile = new File("junk." +
fileType.getExtension());
}//end else
Listing 13
|
Although the code in Listing 13 is long, it is repetitive and relatively
straightforward.
The code in Listing 13 consists of a series of if-else statements.
If the String representation of the file type equals the literal
String in the conditional clause of an if statement:
- The file type is set to a matching type using a constant provided by the
AudioFileFormat.Type class. - A new File object is created that specifies the name and extension
of the audio file as explained below.
The name of the file
The name and extension of the audio file are created using String
concatenation. The name of the audio file is the literal string
"junk".
(Obviously you could add a text field to the GUI in Figure 1, and use the
contents of the text field as the file name in place of junk if you so choose.)
The file extension
The file extension is created by invoking the getExtension method on the
AudioFileFormat.Type object created in the previous statement.
The getExtension method returns a reference to a String object
that encapsulates the extension. The String returned by the
getExtension method is concatenated onto the literal string "junk" to
form the entire file name and extension.
Here is what Sun has to say about the getExtension method.
"Obtains the common file name extension for this file type."
The default case
In the event that the String representation of the file type fails to
match any of the five common types, the final else clause is executed.
The code in this clause displays a message on the screen notifying the user that
the default type AU will be created, and then proceeds to do just that.
(This could happen if the getAudioFileTypes method of the
AudioSystem class were to return a supported file type that is not one of
the five common file types supported by the Java SDK version 1.4.1. For
example, this could happen with a later version of the SDK if Sun decides to
support additional file types. Unfortunately, in that case, this program
would have to be modified to make it able to write the new file types.
With a little additional thought, it should be possible to rewrite this program
to make it handle that eventuality as well. It seems there are enumerable
opportunities to make a program more robust.)
The remaining code
The remaining code in the Thread class is very similar to that discussed
in the program in the earlier lesson. Therefore, I won’t discuss this code
further in this lesson.
Similarly, the method named getAudioFormat is identical to that used in
the program in the earlier lesson, so I won’t discuss it here.
Possible audio format compatibility problems
As mentioned earlier, a complete listing of this program is provided in Listing 14 near the end of the
lesson. If this program fails to run on your machine due to an audio
format compatibility problem, you should examine the comments in the
getAudioFormat method and try modifying the program to use a different audio
format. I have been advised by some readers of the previous lessons that
the audio format returned by the getAudioFormat method doesn’t work well
on all systems.
(Obviously, this is another area where the program could be made more robust
by making certain that the program uses an audio format that is supported on the
system.)
Run the Program
At this point, you may find it useful to compile and run the program shown
in Listing 14 near the end of the lesson. Operating instructions
were provided earlier in the section entitled Basic operation.
If you use a media player, such as the Windows Media Player, to play back your
file, be sure to release the old file from the media player before attempting to create a new file with the same
name and extension. Otherwise, the program will not be able to create the
new file, and a runtime error will occur.
Summary
In this lesson, I showed you how to use the getAudioFileTypes method
of the AudioSystem class to limit the file-type choices presented to
the user, thus eliminating the possibility that the user will select an output
file type that is not supported by the system. Hopefully, this example will
suggest how you can use other methods of the AudioSystem class to deal
with other issues involving the need for improved robustness in your code.
Complete Program Listing
A complete listing of the program is shown in Listing 14.
/*File AudioRecorder03.java
Copyright 2003, Richard G. Baldwin
This is an update of the program named
AudioRecorder02. This version demonstrates how
to limit the file type choices to those that are
supported by the system.
This program demonstrates the capture of audio
data from a microphone into an audio file.
A GUI appears on the screen containing the
following buttons:
Capture
Stop
In addition, up to five radio buttons appear on
the screen allowing the user to select one of the
following five audio output file formats:
AIFC
AIFF
AU
SND
WAVE
Only those file formats supported by the system
are presented to the user. Therefore, only those
file formats supported by the system can be
selected.
When the user clicks the Capture button, input
data from a microphone is captured and saved in
an audio file named junk.xx having the specified
file format. (xx is the file extension for the
specified file format. You can easily change the
file name to something other than junk if you
choose to do so.)
Data capture stops and the output file is closed
when the user clicks the Stop button.
It should be possible to play the audio file
using any of a variety of readily available
media players, such as the Windows Media Player.
Be sure to release the old file from the media
player before attempting to create a new file
with the same extension. Otherwise, a runtime
error will occur when the program attempts to
create the new file.
Tested using SDK 1.4.1 under Win2000
************************************************/
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.sound.sampled.*;
public class AudioRecorder03 extends JFrame{
AudioFormat audioFormat;
TargetDataLine targetDataLine;
final JButton captureBtn =
new JButton("Capture");
final JButton stopBtn = new JButton("Stop");
final JPanel btnPanel = new JPanel();
final ButtonGroup btnGroup = new ButtonGroup();
JRadioButton[] radioBtnArray;
AudioFileFormat.Type[] fileTypes;
public static void main( String args[]){
new AudioRecorder03();
}//end main
public AudioRecorder03(){//constructor
captureBtn.setEnabled(true);
stopBtn.setEnabled(false);
//Register anonymous listeners
captureBtn.addActionListener(
new ActionListener(){
public void actionPerformed(
ActionEvent e){
captureBtn.setEnabled(false);
stopBtn.setEnabled(true);
//Capture input data from the
// microphone until the Stop button is
// clicked.
captureAudio();
}//end actionPerformed
}//end ActionListener
);//end addActionListener()
stopBtn.addActionListener(
new ActionListener(){
public void actionPerformed(
ActionEvent e){
captureBtn.setEnabled(true);
stopBtn.setEnabled(false);
//Terminate the capturing of input data
// from the microphone.
targetDataLine.stop();
targetDataLine.close();
}//end actionPerformed
}//end ActionListener
);//end addActionListener()
//Put the buttons in the JFrame
getContentPane().add(captureBtn);
getContentPane().add(stopBtn);
//Get the file types for which file writing
// support is provided by the system.
fileTypes = AudioSystem.getAudioFileTypes();
//Create an array of radio buttons
radioBtnArray = new JRadioButton[
fileTypes.length];
for(int cnt = 0; cnt < fileTypes.length;
cnt++){
String strType = fileTypes[cnt].toString();
if(cnt == 0){
radioBtnArray[cnt] = new JRadioButton(
strType,true);
}else{
radioBtnArray[cnt] = new JRadioButton(
strType);
}//end else
radioBtnArray[cnt].setActionCommand(
strType);
}//end for loop
//Include the radio buttons in a group
for(int cnt = 0; cnt < fileTypes.length;
cnt++){
btnGroup.add(radioBtnArray[cnt]);
}//end for loop
//Add the radio buttons to the JPanel
for(int cnt = 0; cnt < fileTypes.length;
cnt++){
btnPanel.add(radioBtnArray[cnt]);
}//end for loop
//Put the JPanel in the JFrame
getContentPane().add(btnPanel);
//Finish the GUI and make it visible
getContentPane().setLayout(new FlowLayout());
setTitle("Copyright 2003, R.G.Baldwin");
setDefaultCloseOperation(EXIT_ON_CLOSE);
setSize(300,120);
setVisible(true);
}//end constructor
//This method captures audio input from a
// microphone and saves it in an audio file.
private void captureAudio(){
try{
//Get things set up for capture
audioFormat = getAudioFormat();
DataLine.Info dataLineInfo =
new DataLine.Info(
TargetDataLine.class,
audioFormat);
targetDataLine = (TargetDataLine)
AudioSystem.getLine(dataLineInfo);
//Create a thread to capture the microphone
// data into an audio file and start the
// thread running. It will run until the
// Stop button is clicked. This method
// will return after starting the thread.
new CaptureThread().start();
}catch (Exception e) {
e.printStackTrace();
System.exit(0);
}//end catch
}//end captureAudio method
//This method creates and returns an
// AudioFormat object for a given set of format
// parameters. If these parameters don't work
// well for you, try some of the other
// allowable parameter values, which are shown
// in comments following the declarations.
private AudioFormat getAudioFormat(){
float sampleRate = 8000.0F;
//8000,11025,16000,22050,44100
int sampleSizeInBits = 16;
//8,16
int channels = 1;
//1,2
boolean signed = true;
//true,false
boolean bigEndian = false;
//true,false
return new AudioFormat(sampleRate,
sampleSizeInBits,
channels,
signed,
bigEndian);
}//end getAudioFormat
//=============================================//
//Inner class to capture data from microphone
// and write it to an output audio file.
class CaptureThread extends Thread{
public void run(){
AudioFileFormat.Type fileType = null;
File audioFile = null;
//Get the selected file type described as
// a String
String strType = btnGroup.getSelection().
getActionCommand();
//Set the file type and the file extension
// based on the selected radio button. Test
// for the common audio file types supported
// by Java SDK version 1.4.1. If the type
// doesn't match one of the common types,
// create a file of the default type AU.
if(strType.equals("AIFC")){
fileType = AudioFileFormat.Type.AIFC;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("AIFF")){
fileType = AudioFileFormat.Type.AIFF;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("AU")){
fileType = AudioFileFormat.Type.AU;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("SND")){
fileType = AudioFileFormat.Type.SND;
audioFile = new File("junk." +
fileType.getExtension());
}else if(strType.equals("WAVE")){
fileType = AudioFileFormat.Type.WAVE;
audioFile = new File("junk." +
fileType.getExtension());
}else{
System.out.println(
"File type not recognized by program.");
System.out.println(
"Creating default type AU");
fileType = AudioFileFormat.Type.AU;
audioFile = new File("junk." +
fileType.getExtension());
}//end else
try{
targetDataLine.open(audioFormat);
targetDataLine.start();
AudioSystem.write(
new AudioInputStream(targetDataLine),
fileType,
audioFile);
}catch (Exception e){
e.printStackTrace();
}//end catch
}//end run
}//end inner class CaptureThread
//=============================================//
}//end outer class AudioRecorder03.java
Listing 14
|
Copyright 2003, Richard G. Baldwin. Reproduction in whole or in
part in any form or medium without express written permission from Richard
Baldwin is prohibited.
About the author
Richard Baldwin is a college professor (at Austin Community College in Austin, TX) and private consultant whose primary focus is a combination of Java, C#, and XML. In addition to the many platform and/or language independent benefits of Java and C# applications, he believes that a combination of Java, C#, and XML will become the primary driving force in the delivery of structured information on the Web.
Richard has participated in numerous consulting projects and he
frequently provides onsite training at the high-tech companies located
in and around Austin, Texas. He is the author of Baldwin’s Programming Tutorials,
which has gained a worldwide following among experienced and aspiring programmers.
He has also published articles in JavaPro magazine.
Richard holds an MSEE degree from Southern Methodist University and
has many years of experience in the application of computer technology
to real-world problems.
-end-